invisiframe® SDX Products
Invisible aluminium frame for pocket doors
The argenta invisiframe SDX is a total solution with an invisible aluminium frame for interior pocket doors. With this solution, the austere design of the invisiframe range can be implemented for your sliding doors, maintaining that timeless, streamlined look. The argenta invisiframe SDX uses the well-known invisiframe technology for invisible aluminium frames.
Thanks to the argenta proslide sliding door system, doors can be applied up to 100 kg in weight. The removable upper profile makes it easy and fast to install and remove the trolley systems and stops. The fittings can be attached to the door using the Manual-Fix. This allows you to create the smallest possible amount of space (up to 13/64 inch) between the door panel and the upper profile, resulting in a streamlined result.
|SDX 100||SDX 125|
|Max. Door width (single door)1||Depending on the door height2|
|Max. Door height||84.25 inch||118.11 inch|
|Max. Door thickness||1 3/4 inch|
|Max. Door weight||100kg|
|Wall thickness||3 15/16 inch||4 59/64 inch|
1 Depending on the door with, we advise to use an extra set of vertical profiles each 15.75 inch.
2 To be able to mount and dismount the guiding profile after the wall has been finished
Download the calculation sheet here.
|Sliding hardware||Proslide Manual-fix|
|Stop1||1x slowstop & 1x standard stop|
|Finishing (Profile)||Epoxy primer coating|
1 Min. Door width with 1 Slow Stop = 28.74 inch
1 Min. Door width with 2 Slow Stops = 36.61 inch
Installation video invisidoor SDX: