invisidoor® SDX Products
Invisible aluminium frame for pocket doors
The argenta invisidoor SDX is a total solution with an invisible aluminium frame for interior pocket doors. With this solution, the austere design of the invisidoor range can be implemented for your sliding doors, maintaining that timeless, streamlined look.
The argenta invisidoor SDX uses the well-known invisidoor technology for invisible aluminium frames.
Thanks to the argenta proslide sliding door system, doors can be applied up to 100 kg in weight. The removable upper profile makes it easy and fast to install and remove the trolley systems and stops. The fittings can be attached to the door using the Manual-Fix. This allows you to create the smallest possible amount of space (up to 5 mm) between the door panel and the upper profile, resulting in a streamlined result.
|Max. Door width (single door)1||Depending on the door height2|
|Max. Door height||2140 mm||3000 mm|
|Max. Door thickness||44 mm|
|Max. Door weight||100 kg|
|Wall thickness||100 mm||125 mm|
1 Depending on the door with, we advise to use an extra set of vertical profiles each 400 mm.
2 To be able to mount and dismount the guiding profile after the wall has been finished
Download the calculation sheet here.
|Sliding hardware||Proslide manual-fix|
|Stop1||1 x slow stop & 1 x standard stop|
|Finishing (Profile)||Epoxy primer coating|
1 Min. Door width with 1 Slow Stop = 730 mm
1 Min. Door width with 2 Slow Stops = 930 mm
Installation video invisidoor SDX: